Remote view of bunker hill security dvr settings through router

# How to Configure Remote View on Bunker Hill Security DVR through Router

In today's connected world, having the ability to monitor your home or business security system from anywhere has become increasingly important. With advancements in technology, it is now possible to view live and recorded videos from your Digital Video Recorder (DVR) or IP camera remotely using just a computer with an internet connection.

This article will guide you through the process of setting up remote viewing on your Bunker Hill Security DVR system via router, so that you can keep tabs on what's happening at all times, regardless of where you are in the world.

## Prerequisites

Before we dive into the steps below, please ensure that:

1. Your DVR or IP camera is compatible with remote view capabilities.

2. The device(s) you want to monitor are installed and properly connected to a router which itself is then linked to your computer's network interface (wired Ethernet or Wi-Fi).

## Step 1: Install the Universal CMS Software

To enable remote access, first download and install the universal CMS (Central Management System) software provided by Bunker Hill Security onto your PC. This free tool acts as an intermediary between your DVR/NVR system(s), cameras, recorders etc., allowing users to manage multiple units from one central location without needing physical proximity.

## Step 2: Configure Your Router

Next up is configuring the router settings so that remote connections can be established securely over port forwarding:

1. Log into your router's admin panel using its default login credentials (usually found on a sticker attached to back or underside).

2. Navigate through Advanced Settings > Port Forwarding / Virtual Servers.

3. Add new rule(s) for each device you wish to allow external access too:

- Protocol: TCP/UDP

- External IP Address(es): The public IP address of your router's WAN side (if static), otherwise use * as a wildcard.*

- Internal IP Address(es): The internal IP addresses assigned by your router to the DVR/NVR units you want accessible remotely.

- Public Port(s) To Map: Choose an unused port range between 1024-65535 for each device. For example, if there are two devices (DVR1 & NVR2), map ports 8080-8099 for one and then 8100-8199 for the other.

## Step Static IP Address

If your internet service provider assigns you a dynamic public IP address that changes frequently (which is common with most residential connections), it's essential to set up static routing on both ends:

1. Go into your router’s settings > Advanced tab > WAN Setup/Static Route.

2. Enter the static IP address(es) of each device behind your router under Static IP Client List.

## Step 4: Configure DVR/NVR for Remote Access

Now, log onto the web interface of each individual DVR or NVR unit you want to enable remote viewing on:

1. Navigate to Configuration > Network Settings.

2. Under ‘Remote View’ section:

- Enable 'Allow Remote Login' checkbox

- Enter your username and password under “Username” & 'Password' fields respectively

## Step 5: Accessing Your DVR/NVR Remotely Using IViewer Software (Optional)

If you prefer a more straightforward interface for managing multiple cameras or devices from one central location, consider downloading the free iViewer software. This application supports H.264 video streaming and allows users to view live feeds as well as access recorded footage directly without needing to login into each individual device's web portal separately.

By following these steps carefully and ensuring all hardware is properly connected along with router settings configured correctly, you should now be able to monitor your Bunker Hill Security DVR system(s) remotely from anywhere in the world using just an internet-enabled PC/Mac running compatible software like iViewer. Remember always keep your devices' firmware up-to-date for optimal performance and security.

If you encounter any issues during this process or have further questions, please feel free to leave a comment below so we can help troubleshoot together!

Remote view of bunker hill security dvr settings through router